AIMS offers high performance Claus & tail gas catalysts. We have an exclusive agreement to represent Euro support and Shell Catalysts & Technologies in the Middle Eastern region. It is due to their collaboration, we are able to offer our customers the best of both worlds: joint Claus & Tail Gas catalyst solutions for not only to boost performance, but to also extend and enhance catalyst lifecycle.
We offer the complete package of sulfur recovery catalysts and after sales support:
|Claus Catalyst||S-2001/ESM-221||Activated alumnia spheres||
|S-501/ESM-251||Promoted alumnia spheres||
|S-7001/ESM-271||Cylindrical titania extrudates||
|Claus Oxygen scavenger||S-601/ESM-261||Promoted alumnia spheres||
|Sub-dewpoint TGTU||S-2001/ESM-221||Promoted alumnia spheres||
|Bed support and topping||ESM Ceramic Support Balls||Ceramic spheres||
|ESM- 100||Activated alumina spheres||
|ESM Hi Alumnia Balls||Inert alumina spheres||
Eurosupport website : Euro Support
Tail Gas Treating Catalysts:
Shell Catalysts & Technologies’ 234, 534, 834 and 934 Tail Gas treating catalysts account for close to 70% of the world’s installed capacity. They are installed in over 270 reactors worldwide, including nearly all of the industry’s largest units.
|099||Catalytic Incineration||Used for low temperature oxidation of the sulphur in Claus tail gas and tail gas processes selectively to SO2|
|234||Claus Tail Gas||Low-temperature and low-density TRILOBE catalyst used for the reduction and hydrolysis of the sulphur compounds in Claus tail gases to H2S|
|534||Claus Tail Gas||Higher density, very strong lowest pressure drop spherical catalyst used for the reducation and hydrolysis of the sulphur compounds in Claus tail gases to H2S|
|834||Claus Tail Gas||High activity lowest temperature catalyst with low-pressure drop, operated in TGU reactors at Rit less than 220°C (428°F)|
|934||Claus Tail Gas||Highest active low temperature tail gas catalyst with maximize hydrolysis and hydrogenation perfomance even as low as 200°C (392°F)|
Shell website: Shell Catalysts & Technologies | Shell Global
Refinery catalysts across petroleum refineries help refiners meet fuel standards, manage operational efficiency, enhance yield and conversion, without affecting the environment.
There are various types of catalysts which are used in the petroleum industry; however, the major ones are hydro processing catalysts (hydro-cracking catalyst: zeolite and hydro-treating catalyst), fluid catalytic cracking catalysts and catalytic reforming catalysts (platinum). These catalysts exist in solid-state. Another type of catalyst used in the refining process is the isomerization refining catalyst.
Refinery Catalyst Used In Hydro processing Operation
Hydro processing occurs when hydrogen is added to petroleum. Hydro processing refers to two separate but similar processes, which are hydrotreating and hydrocracking. Hydrotreating and hydrocracking catalysts are applied to improve fuel quality by saturating the olefin and removing the impurities in petroleum feedstocks. Hydro processing is the reaction of oil fractions with hydrogen in the presence of a catalyst. Hydro processing is preferred to thermal processing because it provides higher quality end products, and it does so with a comparatively lower amount of environmental pollutants. There are specialized refining catalysts for each part of the hydro processing system. The refining catalyst used for hydrocracking is different from the refining catalysts used for the hydrotreating process.
Cracking As A Major Part Of The Refining Process
Cracking is the process where complex organic molecules–namely long-chain hydrocarbons–are broken down into smaller molecules–namely light hydrocarbons. It is caused by the breaking of carbon-carbon bonds. Cracking gives refiners the ability to decide the products that they would like to produce. In petroleum refining, this process is used in the production of petrol, diesel, and gasoline. There are different methods of cracking crude petroleum. A distinct type is thermal cracking. The other types are catalytic. They are:
The Difference Between Catalyst Cracking and Hydro-cracking
It is very easy to mix up catalytic cracking and Hydrocracking, so here is the difference:
The basis of catalytic cracking is carbon rejection, while hydrocracking is a hydrogen addition process. Catalytic cracking uses an acid catalyst, while hydrocracking uses a metal catalyst on acid support. Another difference is that catalyst cracking is an endothermic process while hydrocracking is an exothermic process. While catalytic cracking and hydrocracking involve the use of catalysts, catalytic cracking doesn’t involve the use of hydrogen.
Types Of Refining Catalysts
AIMS offers various Refinery Catalysts from M/ Shell Catalysts& Technologies portfolio. AIMS is the exclusive partner for M/s Shell Catalysts& Technologies in Middle East Region.
Our portfolio includes the following processes absorbents:
Gas Dehydration and CO2 Removal
CO2 and Mercaptan Removal
PSA N2 and CH4 Separation
Ethane, Ethylene, Propane/ Propylene Dehydration,
PSA Hydrogen purification,
Chloride & Halogen Removal,
Sulfur species Removal
Mercury& Arsenic removal
Reducing compounds (CO, H2) removal
CO2 removal for cryogenic air separation
VPSA, PSA oxygen generation
PSA hydrogen purification
N2O removal for cryogenic air separation
PSA CO enrichment
Air Dryers Etc.
AIMS provides a wide range of refractory, insulation and passive fire protection materials. We partnered with Thermoheat B.V. to offer a complete package of products. This offers you a unique opportunity of buying your total product requirements with one single supplier. We supply to major industries like hydrocarbon processing, Sulfur Recovery Units, Steel, Aluminum, Power generation, Incineration, Ceramics and Glass.
Thermoheat website: Thermoheat B.V. | Thermoheat
AIMS has an exclusive agreement for heat tracing solutions with Vermeer Thermex International (VTI), which is one of the leading companies that has 60 years of experience in process heating and with more than 30 years of experience as a supplier. Together we design, engineer, manufacture and supply heat tracing solutions for all kinds of piping, vessels and tanks maintaining the required process temperature enabling melt-out requirements.
Bolt-On heat tracing competes both technically and commercially with the conventional heating system & is an attractive thermal maintenance solution for most processes. We have delivered Thermex thermal Bolt-On maintenance (TE) Jackets for valves & components and TE Clamp-on heating system for piping/vessels/tanks to many clients, like Shell, Total, Chevron, BP & HPCL.
Comparison of different heat tracing solutions
|Double Wall Pipe||ThermEx||Tube Traced||Elec Traced|
|Thermal Performance||100%||Performance guaranteed||cold spots on fittings / components||Depends on design / installation|
|CAPEX||High||20 – 50% cheaper than DWP||Moderate, high infra||High, high on controls|
|OPEX||High steam consumption||Low Steam consumption||Low Steam consumption||High periodical inspection cost|
|Maintenance & Ease of modification||Many connections and steam traps||Optimized return and supply lines||Many connection and stream traps||Difficult to modify|
|Reliability||Possibility for cross contamination||100% redundency||Fragile construction||Elec hazard|
Process that require process heating:
Our scope of supply includes design, engineering, manufacturing, supply and site supervision for installation of bolt-on heat tracing system.
Website link for ThermEx: Bolt-on heating systems for all kind of piping, tanks, vessels and components – ThermEx International NV
TOLL MANUFACTURING & BLENDING SERVICES
How can our contract services help you?
AIMS’ outstanding toll production and mixing capabilities benefit both customers and suppliers. AIMS provides a versatile approach to toll production due to its flexibility to manage a wide range of quantities, chemical complexity, and delivery needs. We assist our customers in providing complete solutions that drive new product development in a variety of areas.
With a designated manufacturing site in Abu Dhabi that serves the middle east market, we help our clients in lowering their costs and saving time by formulating, blending, and packing finished products and chemical intermediates.
Quality System & Safety
To guarantee that the products we produce meet our strictest requirements, we provide a wide variety of Quality Control (QC) testing. Because of the strong and flexible management systems we have in place, all of our toll blending, and production sites have received both ISO9001 and ISO14001 certification.
Key Industries Served
Why AIMS for as your Partner?
AIMS can support you with capacity, processes and infrastructure. We offer a confidential toll manufacturing service where we can manufacture and package chemicals according to your specifications based on our production capacity and storage facilities, excellent and modern production and laboratory facilities. Our strength lies with
Collaboration is central to us. Hence, our business model is completely transparent. Not only with you, the customer, but also with our suppliers and investors, we are always exceptionally transparent.
AIMS partnered with Eastman to provide AdapT® high quality MDEA-based amine solvents. These are designed to meet the most stringent specifications in a wide range of gas treatment applications including:
Eastman AdaptT® website link: Gas treatment products and services from Eastman (adaptsolvents.com)
AIMS partnered with Monument Chemical Bayport, LLC to provide ExxonMobil’s proprietary FLEXORBTM SE solvent. FLEXSORB™ SE is is a sterically hindered amine proprietary to ExxonMobil Research and Engineering Company, useful for selective gas scrubbing (Acid gas removal, Acid gas enrichment and Tail gas treating), it is used for the selective removal of H2S in the presence of CO2. Monument Chemical Bayport, LLC. has been authorized by ExxonMobil Research and Engineering Company as a supplier of FLEXSORB™ SE for licensed users. FLEXSORB is a trademark owned by Exxon Mobil Corporation and is used with permission.
Monument Chemical website link: Specialty and Custom Chemical Manufacturing Leader | Monument Chemical
AIMS has partnered with Transcend Solutions to offer their separation technologies all over the Middle East. With their collaboration, we are able to provide efficient, innovative, and customized separation solutions that optimize critical customer processes in the hydrocarbon production and processing industries.
Transcend website: Transcend Solutions – Global Leader in Customized Separation Technology (trnscnd.com)
AIMS has partnered with Delta Steam Systems to supply highly reliable and efficient venturi type steam traps. Our steam traps reduce boiler fuel and CO2 emissions, letting manufacturers get on with what they do best.
Advantages of venturi type steam traps.
Sulfur Operation Support, Inc. (SOS) is the industry’s exclusive supplier of SulTrap®, a patented float trap designed to replace conventional seal legs in a Claus Sulfur Recovery Unit. AIMS has partnered with SOS to offer their patented SulTrap® technology in the Middle East region.
Options we provide
SulTrap® website link: SOS Main Page – – Sultrap Web Page